The quality of these products is greatly important for the smooth running or processes or mechanisms where they are used. This is why the manufacturers in different industries have a great focus on the quality assurance of the rubber and polymeric materials that are used for making such products. The Harness Tester Shore A is the testing instrument that is used for testing the quality and hardness of the rubber materials by exerting a specific amount of force on them. In this way, the manufacturers can easily select the right type of material required for manufacturing a specific type of product.

Pacorr is one of the most dependable hardness tester manufacturers and suppliers offer the most dependable and reliable testing instrument that can be used for testing the hardness of rubber and polymers used in the industries. The rubber is a material that is used in industries to manufacture a variety of different products including machine parts. For example, conveyor belts, rotary belts, V-belts, gaskets and seals. For these products to serve a log life along with a good performance, it is important that the material that is used for manufacturing these products is of very high quality. When it comes to rubber, there are many different varieties and classes of rubber that are available for use and out of them, it is essential to choose the right type of rubber for best performance/. One of the biggest attributes of rubber is the hardness of the rubber that is being used for manufacturing of such crucial parts.

Shore A Hardness test is the one that is used for determining the resistance offered by the rubber sample when there is a concentrated force applied on the rubber with the use of an indented foot. In short, the Shore A test is used for testing the penetration resistance of the rubber. The Hardness Tester Shore A offered by Pacorr is a durometer that is used for testing the hardness or penetration resistance of the rubber. IT is equipped with a hardened steel indenting foot that has a diameter from mm to mm and exerts a force of around 8 N on the test sample. The force is applied on the specimen in a constant manner without any introduction of any sort of jerk. The force is applied for a specific amount of time and then the force application is retrieved. After the test the depth of the indentation is measured which gives the exact measure of the hardness of the specimen. The specimen to be tested is required to have a thickness of 6 mm so that proper testing could be conducted on that. With the help of the Hardness Tester Shore A type, the manufacturers can easily ensure the best quality of material to be used for manufacturing of best quality products for industries.